H33-4
Most compact machine with very high capacities and excellent hill climbing ability
Figure: example machine out of H33-4 product line
Available Application techniques
Description
Robust, high-effective 7-ton construction machine axle with hydraulically switchable speed ranges combined with a high-speed hydraulic motor.
Cooling system with automatic adaption of ventilator speed to ambient temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load).
Inlet of whole cooling air from upper side of the machine - far away from spray mist.
Two pressurised glass bead containers. Filling openings for glass beads at the side of the machine in ideal filling height.
Cockpit incl. all necessary operational controls laterally adjustable without the need to install guides.
Arrangement of operating and supervising instruments can be easily modified according to individual requirements. Adjustable, easy extractable spray gun support for centre and edge line markings.
Motor compartment easily accessible for service work. High ground clearance also eases service works from below.
Excellent panoramic view, also when driving backwards.
Available as an option:
Individual application units are exchangeable (exchangeable container) with low effort by quick opening device systems and modular design principle.
Line widths:
10 up to 100 cm (dependent on equipment)
Specifications
4-cylinder 3800 cm³,
Kubota Turbo diesel engine,
water-cooled
Version I: **
Non-Label (comparable to EU Stage II resp. (US) EPA Tier 2)
74,0 kW at 2600 rpm
Version II: **
Low-emission EU Stage V resp. (US) EPA Tier 4
with diesel oxidation catalyst (DOC)
and Diesel Particulate Filter (DPF)
as well as SCR catalytic converter with AdBlue® and intercooler
86,4 kW at 2600 rpm
** further exhaust stages upon request
Air output, alternatively:
2600 up to 3500 l/min at 7,5 bar; Compressed air cooler
Pressurised glass bead containers:
2 x 160 l (max. 3 bar)
Dimensions (L x W x H mm):
5300 - 6100 x 1340 x 2380 (dependent on equipment)
Weight, equipped:
approx. 2600 up to 4400 kg
approx. 5730 up to 9700 lbs
Techniques / Container volumes: (dependent on equipment)
| Cold paints | up to 1080 l |
| 2-component cold-plastics | up to 650 l |
| Sprayable 2-component spray-plastics | up to 1000 l |
| Thermoplastics | up to 710 l |
| Sprayable Thermoplastics | up to 800 l |
Photos
![[Translate to English:] H33 Kombimaschine mit Druckbehälter (300 ltr) für spritzbare Thermoplastik und Kaltfarbe mit Pumpe (Airless), 385 ltr](/fileadmin/_processed_/b/d/csm_002-roadmarking-hofmann-h33-3-02_040726cf58.jpg "H33 combi-machine with pressurised container (300 l) for sprayable thermoplastic as well as for cold paints with pump (Airless), 385 l")
![[Translate to English:] H33 Kombimaschine mit Druckbehälter (300 ltr) für spritzbare Thermoplastik und Kaltfarbe mit Pumpe (Airless), 385 ltr](/fileadmin/user_upload/bilder/maschinen/002-roadmarking-hofmann-h33-3-02.jpg "H33 combi-machine with pressurised container (300 l) for sprayable thermoplastic as well as for cold paints with pump (Airless), 385 l")
Videos
Brochures
Equipments
Metering technology / AMAKOS®
CONEX® - Metering pump system
MALCON4/4E
ELC4
Accessories
H95-2 Road Drier
WPS Glass Bead Dispenser
Manual Screed Box
MTS - Material Transfer System
Preheaters
Specialties
Additional Seat Support
Simply Palletisable System
Outlet Tube
Protective Covers
Rear view camera
Premarking device
Additional Rear Platform
Marking Patterns
Available Application techniques
Remarks
All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.
The line widths and gaps for double lines depend on the equipment.
Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.
Special solutions on request.
