Skip to main content

H11-1

A manoeuverable machine with lower capacities, especially perfect for narrow marking conditions

Figure: example machine out of H11-1 product line

Available application techniques
  • Cold paints

Hydraulic drive with wheel motors for infinitely variable speed regulation. Mechanical parking brake

Excellent visibility, both during centre and edge line markings

No ifs or buts: motor compartment easily accessible for service work

Operators stand can be easily tilted upward for filling the material container. Feed openings only approx. 80 cm above the road surface

Extraordinary manoeuvrability

One container divided in two chambers for marking material and glass beads

Line widths:
10 up to 50 cm  (dependent on equipment)

Available application techniques
  • Cold paints

3-cylinder 900 cm³
Kubota Diesel motor,
water-cooled,
low-emission
EU Stage V resp. (US) EPA TIER 4

12,5 kW at 2800 rpm

Air output:
up to 740 l/min at 6 bar
(2-cylinder compressor)

Pressurised glass bead containers:
65 l (max. 0,5 bar) or
2 x 30 l (angular/max. 0,5 bar)

Dimensions: (L x W x H mm)
2150 x 1380 x 2000 (dependent on equipment) 

Container volumes:

Cold paintsup to 140 l
  • Brochure H11-1

    Brochure H11-1

  • H11 for Airless method, with pump and pressurised container 120 l
    Zoom

    H11 for Airless method, with pump and pressurised container 120 l

  • H11 for Airless method with pump and pressurised container (120 l)
    Zoom

    H11 for Airless method with pump and pressurised container (120 l)

  • H11 for Airless method with pump and pressurised container 120 l
    Zoom

    H11 for Airless method with pump and pressurised container 120 l

  • H11 for Airless method with pump and pressurised container 120 l
    Zoom

    H11 for Airless method with pump and pressurised container 120 l

  • H11 for Airless method with pump and pressurised container 120 l
    Zoom

    H11 for Airless method with pump and pressurised container 120 l

  • H11 for Airless method with pumpe and pressurised container 120 l
    Zoom

    H11 for Airless method with pumpe and pressurised container 120 l

  • H11 for Airless method with pump and pressurised container 120 l
    Zoom

    H11 for Airless method with pump and pressurised container 120 l

  • H11 for Airless method with pump and pressurised container (120 l) as well as with trailer for traffic cones
    Zoom

    H11 for Airless method with pump and pressurised container (120 l) as well as... more

  • H11 with pressurised containers (2x70 l) for white and yellow paint and 2 x 30 l glass bead tanks
    Zoom

    H11 with pressurised containers (2x70 l) for white and yellow paint and 2 x 30 l... more

  • H11 with pressurised containers (2 x 70 l) for white and yellow paint, including 2 x 30 l glass bead containers
    Zoom

    H11 with pressurised containers (2 x 70 l) for white and yellow paint, including... more

  • H11 for Airless method with pump and pressurised container (120 l) as well as with trailer for traffic cones
    Zoom

    H11 for Airless method with pump and pressurised container (120 l) as well as... more

  • H11 - cold paints - Airless (pump) - edge line markings [A13]

    H11 - cold paints - Airless (pump) - edge line markings

Available application techniques
  • Cold paints

Remarks

All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.

The line widths and gaps for double lines depend on the equipment.

Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.

 

Special solutions on request.

  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi

How can we help you today?

Messagebox Kontaktformular

Messagebox Kontaktformular
captcha