Skip to main content

H9-2 Series

Hand-guided, self-propelled marking machine for small varied marking jobs

Figure: Example machine from H9-2 product line

Available application techniques
  • Cold paints
  • Sprayable 2 component cold-plastics
  • Sprayable Thermoplastics

Infinitely hydraulic drive. Uniform drive of front wheels by differential drive

Vibration isolation for motor/compressor unit

Fixing for marker unit right andleft side

Electronic spacing device available as an option

Pneumatic tires, foam-filled tires or full-rubber tires as an option

Flashlights as an option

Straight-run fixing device for rear wheel in order to maintain easily the direction

Uniform line widths, even intight bends

Height adjustable handle

Drive unit according to CE (declaration of conformity)

Trailer with driver seat available as an option

US-excecution as an option
 

H9-2 Airspray:
Can be equipped with additional hand spray gun.
Possibility to use commercial paint buckets as an insert container.
Material container with manual agitator.

H9-2 Airspray 2c 98:2:
Hardener quantity infinitely variable between 1,0 and 4,0 percentage by weight.
2c spray gun can be used also as 2c hand spray gun.
Possibility to use commercial paint buckets as an insert container.
Material container with manual agitator.

H9-2 Airless 2c 98:2:
Hardener quantity infinitely variable between 1,0 and 3,1 percentage by weight.
Equipment for internal mixing (static mixer).
2c spray gun can be used also as 2c hand spray gun.
Possibility to use commercial paint buckets as an insert container.
Pump delivery rate: Up to 6,0 l/ min. for mixing ratio 98:2.

H9-2 Sprayable Thermoplastic:
Container and gun indirectly heated by heat transfer oil which is heated by LPG.
Equipment for single lines or continuous double lines.
Infinitely variable adjustment of the outlet of the gun towards road surface.
Marker unit with ground wheel with equipment for double lines.
Pneumatic agitator (optional).

Line widths (dependent on equipment):
H9-2 Airspray:
10 until 60 cm 

H9-2 Airspray 2c 98:2   /   H9-2 Airless 2c 98:2   /   H9-2 Sprayable Thermoplastic:
10 until 30 cm 

Available application techniques
  • Cold paints
  • Sprayable 2 component cold-plastics
  • Sprayable Thermoplastics

1-cylinder 390 cm³, Honda gasoline motor,
air-cooled
8,4 kW at 3 200 rpm

Drive unit:
Hydrostatic infinitely variable


Air output:
H9-2 Airspray   /   H9-2 Airspray 2c 98:2   /   H9-2 Sprayable Thermoplastic:
Up to 670 l/min (2-cylinder compressor)

H9-2 Airless 2c 98:2:
Up to 270 l/min (2-cylinder compressor)

Glass bead container:
18 l

Pressurised glass bead container (max 1,0 bar), optional:
H9-2 Airspray
20 l (one container) 2 x 20 l (two container)

H9-2 Airspray 2c 98:2   /   H9-2 Airless 2c 98:2   /   H9-2 sprayable thermoplastic:
20 l (one container)


Dimensions (L x W x H mm, dependent on equipment):

H9-2 Airspray1 800 x 1 050 x 1 300
H9-2 Airspray 2c 98:21 800 x 1 050 x 1 300
H9-2 Airless 2c 98:21 800 x 1 200 x 1 400
H9-2 Sprayable Thermoplastic1 950 x 1 200 (1 gun) / 1 500 (2 guns)  x 1 400
with gas bottle holder

Weights:

H9-2 Airsprayapprox. 340 - 370 kg / 750 - 815 lbs                  
H9-2 Airspray 2c 98:2approx. 370 kg / 815 lbs
H9-2 Airless 2c 98:2approx. 440 kg / 970 lbs
H9-2 Sprayable Thermoplasticapprox. 480 - 520 kg / 1058 - 1146 lbs

 

Container volumes:

Cold paintsup to 48 l (1 container) or 2 x 24 l (2 container for one or two colours) 
Sprayable 2-component cold plasticsup to 48 l
Sprayable Thermoplasticsup to 50 l

 

Trailer with driver seat
Adjustable sitting position

Pneumatic tires

Dimensions (L x W x H mm):
900 x 740 x 1 000

Weight:
20 kg / 44 lbs 

… the perfect and comfortable supplement for H9-2 series (dependent on equipment)

  • Brochure H9

    Brochure H9

  • H5-1 / H9-2 Marking Machines for Race Tracks and Sports Facilities

    H5-1 / H9-2 Marking Machines for Race Tracks and Sports Facilities

  • H9 Airspray
    Zoom

    H9 Airspray

  • H9 Airspray with rolling disks
    Zoom

    H9 Airspray with rolling disks

  • H9 Airspray with rolling disks
    Zoom

    H9 Airspray with rolling disks

  • H9 Airspray
    Zoom

    H9 Airspray

  • H9 Airspray
    Zoom

    H9 Airspray

  • H9 in operation at Silverstone Circuit in Silverstone / UK
    Zoom

    H9 in operation at Silverstone Circuit in Silverstone / UK

  • H9-1 in operation at Nürburgring in Nürburg / Germany
    Zoom

    H9-1 in operation at Nürburgring in Nürburg / Germany

  • H9 in operation at Nürburgring in Nürburg / Germany
    Zoom

    H9 in operation at Nürburgring in Nürburg / Germany

  • H9 in operation at Nürburgring in Nürburg / Germany
    Zoom

    H9 in operation at Nürburgring in Nürburg / Germany

  • H9 Airspray equipped with two containers each 48 l for white and yellow as well as two paint and glass bead guns
    Zoom

    H9 Airspray equipped with two containers each 48 l for white and yellow as well... more

  • H9 Airspray equipped with two containers each 48 l for white and yellow as well as two paint and glass bead guns
    Zoom

    H9 Airspray equipped with two containers each 48 l for white and yellow as well... more

  • H9 Airspray with two pressurised glass bead tanks with 21 l and 15 l volume at max. 1,0 bar
    Zoom

    H9 Airspray with two pressurised glass bead tanks with 21 l and 15 l volume at... more

  • H9 Airless 2-component, M98:2
    Zoom

    H9 Airless 2-component, M98:2

  • H9 Airless 2-component, M98:2
    Zoom

    H9 Airless 2-component, M98:2

  • H9 Airless 2-component, M98:2
    Zoom

    H9 Airless 2-component, M98:2

  • H9 Airless 2-component, M98:2
    Zoom

    H9 Airless 2-component, M98:2

  • H9 Airless for sprayable 2-component cold plastic, M98:2 (US version)
    Zoom

    H9 Airless for sprayable 2-component cold plastic, M98:2 (US version)

  • H9 Airless for sprayable 2-component cold plastic, M98:2 (US version)
    Zoom

    H9 Airless for sprayable 2-component cold plastic, M98:2 (US version)

  • H9 equipped for sprayable thermoplastics with 2 spray guns, 2 glass bead guns and electronic spacing device ELC1plus
    Zoom

    H9 equipped for sprayable thermoplastics with 2 spray guns, 2 glass bead guns... more

  • H9 equipped for sprayable thermoplastics with 2 spray guns, 2 glass bead guns and electronic spacing device ELC1plus
    Zoom

    H9 equipped for sprayable thermoplastics with 2 spray guns, 2 glass bead guns... more

  • H9 equipped for sprayable thermoplastics with 2 spray guns, 2 glass bead guns and electronic spacing device ELC1plus
    Zoom

    H9 equipped for sprayable thermoplastics with 2 spray guns, 2 glass bead guns... more

  • H9 equipped for sprayable thermoplastics with 2 spray guns as well as glass bead guns
    Zoom

    H9 equipped for sprayable thermoplastics with 2 spray guns as well as glass bead... more

  • H9 equipped for sprayable thermoplastics with 2 spray guns as well as glass bead guns
    Zoom

    H9 equipped for sprayable thermoplastics with 2 spray guns as well as glass bead... more

  • H9 Sprayable Thermoplastics - South Africa
    Zoom

    H9 Sprayable Thermoplastics - South Africa

  • H9 trailer with driver seat with adjustable sitting position and pneumatic tires
    Zoom

    H9 trailer with driver seat with adjustable sitting position and pneumatic tires

  • H9 trailer with driver seat with adjustable sitting position and pneumatic tires
    Zoom

    H9 trailer with driver seat with adjustable sitting position and pneumatic tires

  • H9-1 - cold paints - Airspray (low pressure) - Race-Track marking – Nurburgring, Germany [A29]

    H9-1 - cold paints - Airspray (low pressure) - Race-Track marking – Nurburgring,... more

  • H9-1 - cold paints - Airspray (low pressure) - glass bead gun - Costa Rica [A34]

    H9-1 - cold paints - Airspray (low pressure) - glass bead gun - Costa Rica

  • H9-1 – cold paints – Airless (pump) [A25]

    H9-1 – cold paints – Airless (pump)

  • H9-1 – 2-component sprayable cold plastics – Airless (pump) – M98:2 – restricted areas [B41]

    H9-1 – 2-component sprayable cold plastics – Airless (pump) – M98:2 – restricted... more

  • H9-1 - sprayable thermoplastics - testing track - pressure container (50 l) - gas heating - glass bead dispenser [D23]

    H9-1 - sprayable thermoplastics - testing track - pressure container (50 l) -... more

  • H9-1- sprayable thermoplastics - pressure container (50 l) - gas heating - glass bead gun [D24]

    H9-1- sprayable thermoplastics - pressure container (50 l) - gas heating - glass... more

Available application techniques
  • Cold paints
  • Sprayable 2 component cold-plastics
  • Sprayable Thermoplastics

Remarks

All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.

The line widths and gaps for double lines depend on the equipment.

Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.

 

Special solutions on request.

  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi

How can we help you today?

Messagebox Kontaktformular

Messagebox Kontaktformular
captcha