Skip to main content

H33-4

Most compact machine with very high capacities and excellent hill climbing ability

Figure: example machine out of H33-4 product line

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

Robust, high-effective 7-ton construction machine axle with hydraulically switchable speed ranges combined with a high-speed hydraulic motor.

Cooling system with automatic adaption of ventilator speed to ambient temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load).

Inlet of whole cooling air from upper side of the machine - far away from spray mist.

Two pressurised glass bead containers. Filling openings for glass beads at the side of the machine in ideal filling height.

Cockpit incl. all necessary operational controls laterally adjustable without the need to install guides.

Arrangement of operating and supervising instruments can be easily modified according to individual requirements. Adjustable, easy extractable spray gun support for centre and edge line markings.

Motor compartment easily accessible for service work. High ground clearance also eases service works from below.

Excellent panoramic view, also when driving backwards.

Available as an option:
Individual application units are exchangeable (exchangeable container) with low effort by quick opening device systems and modular design principle.

Line widths:
10 up to 100 cm (dependent on equipment)

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

4-cylinder 3 800 cm³, 
Kubota Turbo diesel engine,
water-cooled

Version I: **
Non-Label (comparable to EU Stage II resp. (US) EPA Tier 2
74,0 kW at 2 600 rpm

Version II: **
Low-emission EU Stage V resp. (US) EPA Tier 4 with diesel oxidation catalyst (DOC) and Diesel Particulate Filter (DPF) as well as SCR catalytic converter with AdBlue® and intercooler
86,4 kW at 2600 rpm

** further exhaust stages upon request


Air output, alternatively:

2 800 up to 3 500 l/min at 7,5 bar; Compressed air cooler 

Pressurised glass bead containers:
2 x 160 l (max. 3 bar) 

Dimensions (L x W x H mm):
5 300 - 6 100 x 1 340 x 2 380 (dependent on equipment)

Weight, equipped:
approx. 2 600 up to 4 400 kg
approx. 5 730 up to 9 700 lbs 

Container volumes:

Cold paintsup to 1080 l
2-component cold-plasticsup to 650 l
Sprayable 2-component spray-plasticsup to 1000 l
Thermoplasticsup to 600 l
Sprayable Thermoplasticsup to 600 l
  • Brochure H33-4

    Brochure H33-4

  • Brochure Airport Runway and

    Brochure Airport Runway and


    Airfield Marking Machines

  • Brochure State-of-the-Art Technology

    Brochure State-of-the-Art Technology

  • HOFMANN Info 434 [06/2019]

    HOFMANN Info 434 [06/2019]


    New machine generation H26-4 / H33-4

  • H33 in Manama/Bahrain with 1-component cold paint Airless system, 1 x 460 l and 2 x 220 l pressurised container with 90 cm wide line marker unit incl. 4 paint and glass bead guns each as well as 3 paint and glass bead guns for taxiways in black/yellow/bla
    Zoom

    H33 in Manama/Bahrain with 1-component cold paint Airless system, 1 x 460 l and... more

  • H33 in low pressure method with pump AMAKOS<sup>®</sup>
    Zoom

    H33 in low pressure method with pump AMAKOS®

  • H33 with pressurised container in low pressure method (2 x 385&nbsp;l)
    Zoom

    H33 with pressurised container in low pressure method (2 x 385 l)

  • H33 in Alicante/Spain with pressurised container system for cold paints, tiltable pressurised container with 385 l volume, with 2 paint- and glass bead guns on both sides, for taxiways.
    Zoom

    H33 in Alicante/Spain with pressurised container system for cold paints,... more

  • H33 in Abu Dhabi/UAE equipped with 1-component cold paint Airless system with 3 Airless pumps, 1 x 460 l and 2 x 220 l (divided) pressurised container with 90 cm wide line marker unit incl. 4 paint and glass bead guns as well as further 3 paint- and glass
    Zoom

    H33 in Abu Dhabi/UAE equipped with 1-component cold paint Airless system with 3... more

  • H33 pressurised container in low pressure method (Airspray)
    Zoom

    H33 pressurised container in low pressure method (Airspray)

  • H33 in Hamburg/Germany equipped with 1-component cold paint Airless system and 5 Airless pumps, 1 x 460 l and 2 x 220 l as well as 2 x 110 l pressurised containers and with 90 cm wide line marker unit with 4 paint guns
    Zoom

    H33 in Hamburg/Germany equipped with 1-component cold paint Airless system and 5... more

  • H33 combi-machine with 2 material container for thermoplastics (400 l), incl. MultiDotLine<sup>®</sup> Extruder 40 cm as well as for cold paint Airless with pump (385 l)
    Zoom

    H33 combi-machine with 2 material container for thermoplastics (400 l), incl.... more

  • H33 combi-machine with pressurised container (300&nbsp;l) for sprayable thermoplastic as well as for cold paints with pump (Airless), 385&nbsp;l
    Zoom

    H33 combi-machine with pressurised container (300 l) for sprayable thermoplastic... more

  • H33 comi-machine with two pressurised containers for sprayable thermoplastics (300&nbsp;l) as well as for cold paints (385&nbsp;l)
    Zoom

    H33 comi-machine with two pressurised containers for sprayable thermoplastics... more

  • H33 combi-machine with two pressurised containers for sprayable thermoplastics (300&nbsp;l) as well as for cold paints (385&nbsp;l)
    Zoom

    H33 combi-machine with two pressurised containers for sprayable thermoplastics... more

  • H33 - 2c cold plastic - thick layer (bellows pump) - electric bead dispenser - with exchangeable unit for 2c cold plastic application for  thick layer (bellows pump) for another color - Netherlands
    Zoom

    H33 - 2c cold plastic - thick layer (bellows pump) - electric bead dispenser -... more

  • H33 - equipped for application of 2-component sprayable cold plastics, Airless (pump), M98:2 - electrical glass bead dispenser, operating in Germany
    Zoom

    H33 - equipped for application of 2-component sprayable cold plastics, Airless... more

  • H33 - 2-component sprayable cold plastics - Airspray (pressure container) - M98:2 - electrical glass bead dispenser - operating in Austria
    Zoom

    H33 - 2-component sprayable cold plastics - Airspray (pressure container) -... more

  • H33 with pressurised container (1000 l) and glass bead container (520 l) for sprayable 2-component cold plastics using the Airless spraying mode with path-dependent metering pump AMAKOS®
    Zoom

    H33 with pressurised container (1000 l) and glass bead container (520 l) for... more

  • H33 with pressurised container (1000 l) for sprayable 2-component cold plastics, equipped for Airless spraying method with path-dependent metering pump AMAKOS®
    Zoom

    H33 with pressurised container (1000 l) for sprayable 2-component cold plastics,... more

  • H33 using airless method with servo-hydraulic pump (AMAKOS<sup>®</sup>) with pressurised container (540 l) and additional pressurised glass bead container 600 l (a total of 900 l of glass beads)
    Zoom

    H33 using airless method with servo-hydraulic pump (AMAKOS®) with pressurised... more

  • H33 with unpressurised container (500 l) for thermoplastics with screed box during application in Qatar
    Zoom

    H33 with unpressurised container (500 l) for thermoplastics with screed box... more

  • H33 with pressureless container (570 l) for thermoplastic ATM (Audio Tactile Marking) with MultiDotLine® universal extruder, swiveling under the container, extruder 50 cm - Australia
    Zoom

    H33 with pressureless container (570 l) for thermoplastic ATM (Audio Tactile... more

  • H33 with pressureless container (570 l) for thermoplastic ATM (Audio Tactile Marking) with MultiDotLine® universal extruder, swiveling under the container, extruder 50 cm - Australia
    Zoom

    H33 with pressureless container (570 l) for thermoplastic ATM (Audio Tactile... more

  • H33 with pressureless container (570 l) for thermoplastic ATM (Audio Tactile Marking) with MultiDotLine® universal extruder, swiveling under the container, extruder 50 cm - Australia
    Zoom

    H33 with pressureless container (570 l) for thermoplastic ATM (Audio Tactile... more

  • H33 with pressureless container (570 l) for thermoplastics with MultiDotLine® Universal Extruder, swiveling under the container, extruder 50 cm
    Zoom

    H33 with pressureless container (570 l) for thermoplastics with MultiDotLine®... more

  • H33 with pressureless container (520&nbsp;l) for thermoplastics with swivelling MultiDotLine<sup>®</sup>-extruder 30 cm
    Zoom

    H33 with pressureless container (520 l) for thermoplastics with swivelling... more

  • H33 with pressureless container (500&nbsp;l) incl. two screed boxes (left and right), incl. tool box instead of pressurised glass bead containers
    Zoom

    H33 with pressureless container (500 l) incl. two screed boxes (left and right),... more

  • H33 line marking machine for sprayable thermoplastics (600 l) with metering pump as well as MultiDotLine® Universal extruder, 50 cm
    Zoom

    H33 line marking machine for sprayable thermoplastics (600 l) with metering pump... more

  • H33 combi roadmarking machine with pressurised container (600&nbsp;l) for sprayable thermoplastics and thermoplastics for screed box application as well as especially designed pressurised glass bead containers (2 x 150&nbsp;l)
    Zoom

    H33 combi roadmarking machine with pressurised container (600 l) for sprayable... more

  • H33,combi-machine with pressurised container (500&nbsp;l) for sprayable thermoplastics / thermoplastics with MultiDotLine<sup>®</sup> Extruder
    Zoom

    H33,combi-machine with pressurised container (500 l) for sprayable... more

  • H33 combi-machine with pressureless container (500&nbsp;l):  Sprayable thermoplastics with path-dependent pump / thermoplastics with extruder
    Zoom

    H33 combi-machine with pressureless container (500 l): Sprayable thermoplastics... more

  • H33 combi-machine with pressurised container (500&nbsp;l) for sprayable thermoplastic and thermoplastics with MultiDotLine<sup>®</sup> extruder 50&nbsp;cm
    Zoom

    H33 combi-machine with pressurised container (500 l) for sprayable thermoplastic... more

  • H33 with unpressurised container (500 l)  for sprayable thermoplastics with metering pump
    Zoom

    H33 with unpressurised container (500 l) for sprayable thermoplastics with... more

  • H33 Road marking machines (2x) for sprayable thermoplastics (420 resp. 500 l) incl. metering pump with 2 respectively 3 spray guns
    Zoom

    H33 Road marking machines (2x) for sprayable thermoplastics (420 resp. 500 l)... more

  • H33 Road marking machine for sprayable thermoplastics (420 l) incl. metering pump with 2 spray guns
    Zoom

    H33 Road marking machine for sprayable thermoplastics (420 l) incl. metering... more

  • H33 with pressurised container (450&nbsp;l)
    Zoom

    H33 with pressurised container (450 l)

  • H26/H33 with pressurised container (300&nbsp;l), detachable container wall for easy cleaning
    Zoom

    H26/H33 with pressurised container (300 l), detachable container wall for easy... more

  • H33 with pressurised container (800&nbsp;l)
    Zoom

    H33 with pressurised container (800 l)

  • H33 with 600 l pressurized container
    Zoom

    H33 with 600 l pressurized container

  • H33 with pressurised container (600&nbsp;l)
    Zoom

    H33 with pressurised container (600 l)

  • H33 with 600 l pressurized container
    Zoom

    H33 with 600 l pressurized container

  • H33 with 600 l pressurized container
    Zoom

    H33 with 600 l pressurized container

  • H33 Machine for sprayable thermoplastics with atomizing air heating
    Zoom

    H33 Machine for sprayable thermoplastics with atomizing air heating

  • On-board computer and line gap electronic ELC4
    Zoom

    On-board computer and line gap electronic ELC4

  • H33-4 equipped for the application of cold paints, Airless (pump), operating with 3 paint spray guns (90 cm) on airfield - Munich/Germany [A37]

    H33-4 equipped for the application of cold paints, Airless (pump), operating... more

  • H33-4 - cold paint - Airspray (low pressure) - glass bead gun - Austria [A36]

    H33-4 - cold paint - Airspray (low pressure) - glass bead gun - Austria

  • H33-4 equipped for cold paints - Airless (pump) - 3 paint spray guns - 90 line width - airport Munich [A31]

    H33-4 equipped for cold paints - Airless (pump) - 3 paint spray guns - 90 line... more

  • H33-3 - cold paints - Airspray (low pressure) - black - rolling disks - Qatar [A35]

    H33-3 - cold paints - Airspray (low pressure) - black - rolling disks - Qatar

  • H33-4 - 2c sprayable cold plastics - Airspray (pressure container) - M98-2 - electric bead dispenser  - Austria [B59]

    H33-4 - 2c sprayable cold plastics - Airspray (pressure container) - M98-2 -... more

  • H33-3 - 2-component cold plastics – bellow pump – stochastic agglomerates – M98 :2 – Belgium [B33]

    H33-3 - 2-component cold plastics – bellow pump – stochastic agglomerates – M98... more

  • H33-3 - 2-component cold plastics – defined agglomerates (Spotflex®) - M 98 : 2 – Belgium [B34]

    H33-3 - 2-component cold plastics – defined agglomerates (Spotflex®) - M 98 : 2... more

  • H33-4 - equipped for application of 2-component sprayable cold plastics, Airless (pump), M98:2 - electrical glass bead dispenser, operating in Germany [B56]

    H33-4 - equipped for application of 2-component sprayable cold plastics, Airless... more

  • MultiDotLine® - Retro-reflection at night and wetness [C10]

    MultiDotLine® - Retro-reflection at night and wetness

  • H33-4 equipped for the application of thermoplastics - MultiDotLine®universal extruder 30 cm, LongDots, electrical glass bead dispenser, The Netherlands [C45]

    H33-4 equipped for the application of thermoplastics - MultiDotLine®universal... more

  • H33-4 equipped for thermoplastics with MultiDotLine® Universal Extruder 50 cm for plain lines, incl. glass bead gun, operating in Russia [C38]

    H33-4 equipped for thermoplastics with MultiDotLine® Universal Extruder 50 cm... more

  • H33-4 - thermoplastics - universal extruder - plain lines (MultiDotLine®) - glass bead gun - Russia [C36]

    H33-4 - thermoplastics - universal extruder - plain lines (MultiDotLine®) -... more

  • H33-4 - thermoplastics - swivelling MultiDotLine® extruder 30 cm - plain lines, operating in France [C34]

    H33-4 - thermoplastics - swivelling MultiDotLine® extruder 30 cm - plain lines,... more

  • H33-4 for thermoplastics - MultiDotLine® Universal Extruder 50 cm - plain lines - glass bead gun - Estonia [C31]

    H33-4 for thermoplastics - MultiDotLine® Universal Extruder 50 cm - plain lines... more

  • H33-3 - thermoplastics - swivelling MultiDotLine® Extruder - plain lines - metering bead gun - operating in Malaysia [C22]

    H33-3 - thermoplastics - swivelling MultiDotLine® Extruder - plain lines -... more

  • H33-3 combined machine – thermoplastics - MultiDotLine® extruder – plain lines as well as cold paints – Airless (pump) [C23]

    H33-3 combined machine – thermoplastics - MultiDotLine® extruder – plain lines... more

  • H33-4 for sprayable thermoplastics - pressureless container (600 l) - bellow pump - diesel heating - glass bead gun - Estonia [D19]

    H33-4 for sprayable thermoplastics - pressureless container (600 l) - bellow... more

  • H33-4 - sprayable thermoplastics with pressureless container (500 l), bellow pump, diesel heating, glass bead dispenser [D17]

    H33-4 - sprayable thermoplastics with pressureless container (500 l), bellow... more

  • H33-3 - multi purpose machine - sprayable thermoplastics - pressurised container (300 l) - diesel oil heated - cold paints (385 l) - glass bead gun - UAE [D18]

    H33-3 - multi purpose machine - sprayable thermoplastics - pressurised container... more

  • H33-3 – sprayable thermoplastics – pressure container (800 l) – diesel oil heating – Saudi Arabia [D10]

    H33-3 – sprayable thermoplastics – pressure container (800 l) – diesel oil... more

  • H33-3 – sprayable thermoplastics – pressurised container (600 lts) – diesel heating – glass bead dispenser [D15]

    H33-3 – sprayable thermoplastics – pressurised container (600 lts) – diesel... more

  • Additional extension of seat support with direct seat above the extruder and mudguard system against pollution as well as a sturdy aluminium roof and comfort seats.
    Zoom

    Additional extension of seat support with direct seat above the extruder and... more

  • Additional extension of seat support with direct seat above the extruder and mudguard system against pollution as well as a sturdy aluminium roof and comfort seats.
    Zoom

    Additional extension of seat support with direct seat above the extruder and... more

  • Simply palletizable (exchangeable) system incl. electric, hydraulic and pneumatic quick opening devices (fittings for thermoplastic systems)
    Zoom

    Simply palletizable (exchangeable) system incl. electric, hydraulic and... more

  • Simply palletisable (exchangeable) system incl. electric and hydraulic quick opening devices as well as brackets for quick exchange of application units via forklift
    Zoom

    Simply palletisable (exchangeable) system incl. electric and hydraulic quick... more

  • Simply palletisable (exchangeable) system incl. electric and hydraulic quick opening devices as well as brackets for quick exchange of application units via forklift
    Zoom

    Simply palletisable (exchangeable) system incl. electric and hydraulic quick... more

  • Outlet tube heated by heat transfer oil and discharge valve controlled pneumatically for thermoplastics using screed box method
    Zoom

    Outlet tube heated by heat transfer oil and discharge valve controlled... more

  • Protective cover for extruder systems for MultiDotLine<sup>®</sup> extruder
    Zoom

    Protective cover for extruder systems for MultiDotLine® extruder

  • Protective cover for extruder systems for MultiDotLine<sup>®</sup> extruder
    Zoom

    Protective cover for extruder systems for MultiDotLine® extruder

  • Protective cover for electronic spacing device, e.g. MALCON4
    Zoom

    Protective cover for electronic spacing device, e.g. MALCON4

  • Protective cover for the HOFMANN universal pump system
    Zoom

    Protective cover for the HOFMANN universal pump system

  • Rear view camera for all self-propelled machines
    Zoom

    Rear view camera for all self-propelled machines

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Laterally pluggable additional rear platform for series H26/H33
    Zoom

    Laterally pluggable additional rear platform for series H26/H33

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

Remarks

All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.

The line widths and gaps for double lines depend on the equipment.

Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.

 

Special solutions on request.

  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi
  • Einzellinie Einzellinie s-l Kaltfarben Doppellinie Kaltfarben Doppellinie s-l Kaltfarben Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Schriftzug
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Rip-n-Dot Einzellinie Rip-n-Dot Einzellinie unterbrochen
  • hofmann road marking systems Longdot Einzellinie Longdot Einzellinie unterbrochen Longdot Doppellinie Longdot Doppellinie unterbrochen Longdot Kombi Linie
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi

How can we help you today?

Messagebox Kontaktformular

Messagebox Kontaktformular
captcha