Skip to main content

H26-4

A compact machine with high capacities

Figure: example machine out of H26-4 product line

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

Robust, high-effective 7-ton construction machine axle with hydraulically switchable speed ranges combined with a high-speed hydraulic motor

Cooling system with automatic adaption of ventilator speed to ambient temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load)

Inlet of whole cooling air from upper side of the machine - far away from spray mist

Two pressurised glass bead containers. Filling openings for glass beads at the side of the machine in ideal filling height

Cockpit incl. all necessary operational controls laterally adjustable without the need to install guides

Arrangement of operating and supervising instruments can be easily modified according to individual requirements. Adjustable, easy extractable spray gun support for centre and edge line markings

Motor compartment easily accessible for service work.High ground clearance also eases service works from below

Excellent panoramic view, also when driving backwards

Available as an option:
Individual application units are exchangeable (exchangeable container) with low effort by quick opening device systems and modular design principle

Line widths:
10 up to 100 cm (dependent on equipment)

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

4-cylinder 3 800 cm³,
Kubota Turbo diesel engine,
water-cooled 

Version I: **
Non-Label (comparable to EU Stage II resp. (US) EPA Tier 2)

74,0 kW at 2 600 rpm

Version II: **
Low-emission EU Stage V resp. (US) EPA Tier 4 
with diesel oxidation catalyst (DOC) and Diesel Particulate Filter (DPF)

55,4 kW at 2200 rpm

** further exhaus stages upon request

Air output, alternatively:

1 300 up to 2 400 l/min at 7,5 bar;
Compressed air cooler

Pressurised glass bead containers:
2 x 160 l (max. 3 bar)

Dimensions (L x W x H mm):
5 300 - 6 100 x 1 340 x 2 380 (dependent on equipment)

Weight, equipped:
approx. 2 400 up to 4 200 kg
approx. 5 290 up to 9 260 lbs 

Container volumes:

Cold paintsup to 920 l
2-component cold-plasticsup to 600 l
Sprayable 2-component spray-plasticsup to 800 l
Thermoplasticsup to 500 l
Sprayable Thermoplasticsup to 600 l
  • Brochure H26-4

    Brochure H26-4

  • Brochure Airport Runway and

    Brochure Airport Runway and


    Airfield Marking Machines

  • Brochure State-of-the-Art Technology

    Brochure State-of-the-Art Technology

  • HOFMANN Info 434 [06/2019]

    HOFMANN Info 434 [06/2019]


    New machine generation H26-4 / H33-4

  • H26 with pressure container (2x385 l)
    Zoom

    H26 with pressure container (2x385 l)

  • H26 in Portugal (Air Base) equipped with 1-component cold paint Airless system, 1x540 l and 1x385 l pressurised containers and 90 cm wide line marker unit incl. 4 paint- and glass bead guns each as well as 1 paint- and glass bead gun each for taxiways
    Zoom

    H26 in Portugal (Air Base) equipped with 1-component cold paint Airless system,... more

  • H26 with pressurised containers (2 x 460 l) as well as pressurised bead containers (2 x 170 l) with a pre-pressure of 1,1 bar
    Zoom

    H26 with pressurised containers (2 x 460 l) as well as pressurised bead... more

  • H26 in Madrid/Spain with pressurised container system for cold paints, 1 x 440 l (2 chambers each 220 l) pressurised container incl. 3 paint guns for safety lines (white/red/white)
    Zoom

    H26 in Madrid/Spain with pressurised container system for cold paints, 1 x 440 l... more

  • H26 with pressure containers (2 x 225 l) mounted longitudinally on pipe-in-pipe frame, for lateral and center markings
    Zoom

    H26 with pressure containers (2 x 225 l) mounted longitudinally on pipe-in-pipe... more

  • H26 in Bucharest/Romania with pressurised container system for cold paints, 1 x 460 l and 1 x 225 l pressurised container incl. 90 cm wide line marker unit with 3 paint- and glass bead guns each as well as 2 paint- and glass bead guns each for taxiways
    Zoom

    H26 in Bucharest/Romania with pressurised container system for cold paints, 1 x... more

  • H26 airless method with servo-hydraulic pump (AMAKOS<sup>®</sup>) with pressurised container (540 l)
    Zoom

    H26 airless method with servo-hydraulic pump (AMAKOS®) with pressurised... more

  • H26 road marking machine for sprayable 2-component cold plastics using the Airless mode (AMAKOS®), with electrical bead dispenser and additional container for premarking material
    Zoom

    H26 road marking machine for sprayable 2-component cold plastics using the... more

  • H26 in Saint Petersburg/Russia equipped with 1-component cold paints as well as sprayable 2-component cold plastics Airless system 98:2, 460 l pressurised container, for use with one paint gun resp. 2-component spray gun for taxiways
    Zoom

    H26 in Saint Petersburg/Russia equipped with 1-component cold paints as well as... more

  • H26 at Airbus in Hamburg / Germany equipped for Airless 1-component cold paints as well as for Airless 2-component sprayable cold plastic system M98:2, 460 l pressurised container as well as 90 cm wide line marker unit and 3 paint guns
    Zoom

    H26 at Airbus in Hamburg / Germany equipped for Airless 1-component cold paints... more

  • H26 in Ramstein - United States Air Base, Germany with Airless system for 1-component cold paints (two pumps) incl. 5 paint and 2 glass bead guns for yellow/black/yellow/black and black/yellow/black/yellow/black "taxiways", 2 x 230 l pressurised container
    Zoom

    H26 in Ramstein - United States Air Base, Germany with Airless system for... more

  • H26 Road marking machine for sprayable 2-component cold plastics using the Airless method (AMAKOS<sup>®</sup>), M98:2
    Zoom

    H26 Road marking machine for sprayable 2-component cold plastics using the... more

  • H26 Road marking machine with pressurised container (650 l) for 2-component cold plastics with bellow pump for stochastic agglomerates, Spotflex® and profiled markings, M98:2
    Zoom

    H26 Road marking machine with pressurised container (650 l) for 2-component cold... more

  • H26 ellow pump system with 540&nbsp;l pressurised container equipped with scattering drum system for stochastic agglomerates Spotflex<sup>&reg;</sup>-system for defined agglomerates as well as plain line and screed box system for 90<sup>°</sup> cross prof
    Zoom

    H26 bellow pump system with 540 l pressurised container equipped with scattering... more

  • H26 in extruder method (2 x 300 l, here: green coloured agglomerates)
    Zoom

    H26 in extruder method (2 x 300 l, here: green coloured agglomerates)

  • H26 in extruder method, mixing ratio 98:2, with pressureless containers (2 x 300&nbsp;l)
    Zoom

    H26 in extruder method, mixing ratio 98:2, with pressureless containers (2 x... more

  • H26 in extruder method, mixing ratio 98:2, with pressureless container (585&nbsp;l)
    Zoom

    H26 in extruder method, mixing ratio 98:2, with pressureless container (585 l)

  • H26 with bellow pump system (M98:2) and 460 l pressurized container equipped for plain lines, stochastic agglomerates as well as Spotflex<sup>®</sup> markings, incl. metering glass bead guns
    Zoom

    H26 with bellow pump system (M98:2) and 460 l pressurized container equipped for... more

  • H26 using the airless method with servo-hydraulic pump (AMAKOS<sup>®</sup>) with pressurised container (800 l), increased glass bead container (450 l) and extended rack for warning signs
    Zoom

    H26 using the airless method with servo-hydraulic pump (AMAKOS®) with... more

  • H26 with pressureless container (570 l) for thermoplastics with MultiDotLine® Universal Extruder, swiveling under the container, extruder 50 cm
    Zoom

    H26 with pressureless container (570 l) for thermoplastics with MultiDotLine®... more

  • H26 with pressureless container (570 l) for thermoplastics with MultiDotLine® Universal Extruder, swiveling under the container, extruder 50 cm
    Zoom

    H26 with pressureless container (570 l) for thermoplastics with MultiDotLine®... more

  • H26 during extruder method with S+S extruder (400 l)
    Zoom

    H26 during extruder method with S+S extruder (400 l)

  • H26 with pressurized container (420&nbsp;l) for thermoplastics with MultiDotLine<sup>®</sup> Extruder, 40&nbsp;cm
    Zoom

    H26 with pressurized container (420 l) for thermoplastics with MultiDotLine®... more

  • H26 Combi-System for thermoplastics MultiDotLine<sup>&reg;</sup>Plus as well as for sprayable thermoplastics, 2 guns for sprayable thermoplastics, one 450 l containerusable as pressurized as well as unpressurised container, heated by diesel oil
    Zoom

    H26 Combi-System for thermoplastics MultiDotLine®Plus as well as for sprayable... more

  • H26 combi-machine equipped with pressure container (450 l) for sprayable thermoplastic with marker unit which can be pushed through as well as for thermoplastics incl. two S+S standard extruder
    Zoom

    H26 combi-machine equipped with pressure container (450 l) for sprayable... more

  • H26 with pressure container (300&nbsp;l)
    Zoom

    H26 with pressure container (300 l)

  • H26 with pressurised container (300&nbsp;l) and gas burner unit, 3 guns for sprayable thermoplastics as well as a double preheater unit consisting of two ID1100-1 with diesel oil burner, platform and stairs, power station 10 kW
    Zoom

    H26 with pressurised container (300 l) and gas burner unit, 3 guns for sprayable... more

  • H26 with pressurised container (300&nbsp;l)
    Zoom

    H26 with pressurised container (300 l)

  • H26/H33 with pressurised container (300&nbsp;l), detachable container wall for easy cleaning
    Zoom

    H26/H33 with pressurised container (300 l), detachable container wall for easy... more

  • H26 with 300&nbsp;l pressurised container
    Zoom

    H26 with 300 l pressurised container

  • On-board computer and line-gap electronic MALCON4
    Zoom

    On-board computer and line-gap electronic MALCON4

  • H26-3 Cold Paints – Airspray (low pressure method) – Colombia [A23]

    H26-3 Cold Paints – Airspray (low pressure method) – Colombia

  • "H26-3 - cold paint - Airless (pump) - Airbus - 90&nbsp;cm	" [A06]

    "H26-3 - cold paint - Airless (pump) - Airbus - 90 cm "

  • H26-4 - 2-component cold plastics - servo bellow pump - defined agglomerates (Spotflex®) - M 98:2 - Electric bead dispenser - Germany [B48]

    H26-4 - 2-component cold plastics - servo bellow pump - defined agglomerates... more

  • H26-4 - 2-component cold plastics - bellow pump - plain lines and slider for profiled markings - M98:2 - electrical glass bead dispenser - Germany [B46]

    H26-4 - 2-component cold plastics - bellow pump - plain lines and slider for... more

  • H26-3 - 2-component cold plastics - screed box - profiles - mixing ratio 98:2 - double glass bead gun - Qatar [B45]

    H26-3 - 2-component cold plastics - screed box - profiles - mixing ratio 98:2 -... more

  • H26-3 - 2-component cold plastics - bellow pump - 45° diagonally profiled markings - M98:2 - glass bead dispenser - Germany [B51]

    H26-3 - 2-component cold plastics - bellow pump - 45° diagonally profiled... more

  • H26-3 – 2-component cold plastics – bellow pump – plain lines – M98:2 [B39]

    H26-3 – 2-component cold plastics – bellow pump – plain lines – M98:2

  • H26-3 – 2-component cold plastics – bellow pump – screed box for profiles – quick-exchange system – M98:2 [B30]

    H26-3 – 2-component cold plastics – bellow pump – screed box for profiles –... more

  • H26-4 - 2-component cold plastics - bellow pump - stochastic agglomerates - M98:2 - electrical glass bead dispenser [B44]

    H26-4 - 2-component cold plastics - bellow pump - stochastic agglomerates -... more

  • H26-4 – 2c sprayable cold plastics – Airless (pump) – M98:2 [B43]

    H26-4 – 2c sprayable cold plastics – Airless (pump) – M98:2

  • H26-4 equipped for the application of thermoplastics, with swivelling 30 cm MultiDotLine® Universal extruder for plain lines and dots during marking operation in France [C35]

    H26-4 equipped for the application of thermoplastics, with swivelling 30 cm... more

  • MultiDotLine® - Retro-reflection at night and wetness [C10]

    MultiDotLine® - Retro-reflection at night and wetness

  • H26-3 Thermoplastics - extruder – defined agglomerates on a plain line (MultiDotLine® Plus) - System II [C17]

    H26-3 Thermoplastics - extruder – defined agglomerates on a plain line... more

  • H26-3 – sprayable Thermoplastics – pressurised container (300 l) – gas heating – glass bead gun – South Africa [D12]

    H26-3 – sprayable Thermoplastics – pressurised container (300 l) – gas heating –... more

  • Additional extension of seat support with direct seat above the extruder and mudguard system against pollution as well as a sturdy aluminium roof and comfort seats.
    Zoom

    Additional extension of seat support with direct seat above the extruder and... more

  • Additional extension of seat support with direct seat above the extruder and mudguard system against pollution as well as a sturdy aluminium roof and comfort seats.
    Zoom

    Additional extension of seat support with direct seat above the extruder and... more

  • Simply palletizable (exchangeable) system incl. electric, hydraulic and pneumatic quick opening devices (fittings for thermoplastic systems)
    Zoom

    Simply palletizable (exchangeable) system incl. electric, hydraulic and... more

  • Simply palletisable (exchangeable) system incl. electric and hydraulic quick opening devices as well as brackets for quick exchange of application units via forklift
    Zoom

    Simply palletisable (exchangeable) system incl. electric and hydraulic quick... more

  • Simply palletisable (exchangeable) system incl. electric and hydraulic quick opening devices as well as brackets for quick exchange of application units via forklift
    Zoom

    Simply palletisable (exchangeable) system incl. electric and hydraulic quick... more

  • Outlet tube heated by heat transfer oil and discharge valve controlled pneumatically for thermoplastics using screed box method
    Zoom

    Outlet tube heated by heat transfer oil and discharge valve controlled... more

  • Protective cover for extruder systems for MultiDotLine<sup>®</sup> extruder
    Zoom

    Protective cover for extruder systems for MultiDotLine® extruder

  • Protective cover for extruder systems for MultiDotLine<sup>®</sup> extruder
    Zoom

    Protective cover for extruder systems for MultiDotLine® extruder

  • Protective cover for electronic spacing device, e.g. MALCON4
    Zoom

    Protective cover for electronic spacing device, e.g. MALCON4

  • Protective cover for the HOFMANN universal pump system
    Zoom

    Protective cover for the HOFMANN universal pump system

  • Rear view camera for all self-propelled machines
    Zoom

    Rear view camera for all self-propelled machines

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Laterally pluggable additional rear platform for series H26/H33
    Zoom

    Laterally pluggable additional rear platform for series H26/H33

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

Remarks

All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.

The line widths and gaps for double lines depend on the equipment.

Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.

 

Special solutions on request.

  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi
  • Einzellinie Einzellinie s-l Kaltfarben Doppellinie Kaltfarben Doppellinie s-l Kaltfarben Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Schriftzug
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Rip-n-Dot Einzellinie Rip-n-Dot Einzellinie unterbrochen
  • hofmann road marking systems Longdot Einzellinie Longdot Einzellinie unterbrochen Longdot Doppellinie Longdot Doppellinie unterbrochen Longdot Kombi Linie
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi

How can we help you today?

Messagebox Kontaktformular

Messagebox Kontaktformular
captcha