Skip to main content

H18-2

A compact, narrow and maneuverable machine with medium-sized capacities

Figure: example machine out of H18 product line

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

Hydraulic drive with wheel motor with infinitely variable speed adjustment

Hydraulic multi-disk parking brake

Cooling system with automatic adaption of ventilator speed to ambient temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load)

Inlet of whole cooling air from upper side of the machine - far away from spray mist

Exhaust pipe is under the machine and outlet is adjustable depending on the application

One pressurised glass bead container

Cockpit with all operating elements adjustable without the need to install guides

High visibility during center- and edge line markings

Fold-out ladder on the seat support

Individual application units (exchangeable container) or exchange of front chassis incl. application unit at low effort by quick opening device systems and modular design principle

Engine compartment easily accessible for service work

Excellent panoramic view, also when driving backwards

Line widths:
10 up to 100 cm (dependent on equipment)

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

4 cylinder 2400 cm³
Kubota Turbo Diesel Motor
water-cooled

Version I:
Non label (corresponds to EU Stage IIIA resp. (US) EPA Tier 4 Interim)
44,0 kW at 2700 rpm

Version II:

low-emission EU Stage V resp. (US) EPA Tier 4 Interim
with diesel oxidation catalyst (DOC) and
Diesel Particulate Filter (DPF)
48,6 kW at 2700 rpm

Air output, alternatively:
1300 - 2200 l/min at 7,5 bar; compressed-air cooler 

Pressurised glass bead container:
170 l (max. 0,8 bar) 

Dimensions (L x W x H mm):
4260 up 5600 x 1260 x 2300
(dependent on equipment) 

 

Container volumes:

Cold paintsup to 540 l
2-component cold-plasticsup to 540 l
Sprayable 2-component spray-plasticsup to 540 l
Thermoplasticsup to 320 l
Sprayable Thermoplasticsup to 320 l
  • Brochure H18-2

    Brochure H18-2

  • Brochure Airport Runway and

    Brochure Airport Runway and


    Airfield Marking Machines

  • Brochure State-of-the-Art Technology

    Brochure State-of-the-Art Technology

  • H18 in Iceland equipped with pressurised container system for cold paint, 2 x 225 l pressurised containers and 90 cm wide line marker unit incl. 3 paint- and glass bead guns each
    Zoom

    H18 in Iceland equipped with pressurised container system for cold paint, 2 x... more

  • H18 with pressurised container (2 x 225 l)
    Zoom

    H18 with pressurised container (2 x 225 l)

  • H18 in Mumbai/India equipped with 1-component cold paint Airless system, 2 x 225 l pressurised containers incl.  3 paint guns for taxiways (black/yellow/black)
    Zoom

    H18 in Mumbai/India equipped with 1-component cold paint Airless system, 2 x 225... more

  • H18 Royal Air Force/UK equipped with 1-component cold paint Airless system (two pumps) with 90 cm wide line marker unit incl. 4 paint and glass bead gunsas well as 3 paint- and glass bead guns for taxiways (black/yellow/black), 2 x 225 l pressurised conta
    Zoom

    H18 Royal Air Force/UK equipped with 1-component cold paint Airless system (two... more

  • H18 bellow pump system (540 l) with Spotflex® system, M98: 2 and electrical glass bead dispenser
    Zoom

    H18 bellow pump system (540 l) with Spotflex® system, M98: 2 and electrical... more

  • H18 bellow pump system (460 l) with Spotflex® system, M98: 2 and electrical glass bead dispenser
    Zoom

    H18 bellow pump system (460 l) with Spotflex® system, M98: 2 and electrical... more

  • H18 Bellow pump system (460 l) with Spotflex® system and spiked roller, M98:2 and electrical glass bead dispenser
    Zoom

    H18 Bellow pump system (460 l) with Spotflex® system and spiked roller, M98:2... more

  • H18 with bellow pump system (460 l) and Spotflex<sup>®</sup>, M98:2
    Zoom

    H18 with bellow pump system (460 l) and Spotflex®, M98:2

  • H18 with bellow pump system (460 l) and Spotflex<sup>®</sup>, M98:2
    Zoom

    H18 with bellow pump system (460 l) and Spotflex®, M98:2

  • H18 with bellow pump system  (460 l) for plain line M98:2 in Kazakhstan
    Zoom

    H18 with bellow pump system (460 l) for plain line M98:2 in Kazakhstan

  • H18 extruder operation for agglomerates (Pathfinder) 6 inches
    Zoom

    H18 extruder operation for agglomerates (Pathfinder) 6 inches

  • H18 airless method with pump (AMAKOS<sup>®</sup>), with pressurised container (460 l), M98:2 in Siberia
    Zoom

    H18 airless method with pump (AMAKOS®), with pressurised container (460 l),... more

  • H18 with split frame design with 320 l container for thermoplastics and MultiDotLine<sup>®</sup> Extruder 30 cm, container for sprayable thermoplastics as well as container for 2-component sprayable cold plastics (460 l) Airless 98:2 incl. 24 l pump and g
    Zoom

    H18 with split frame design with 320 l container for thermoplastics and... more

  • H18 with split frame design with 320 l container for thermoplastics and MultiDotLine<sup>®</sup> Extruder 30 cm, container for sprayable thermoplastics as well as container for 2-component sprayable cold plastics (460 l) Airless 98:2 incl. 24 l pump and g
    Zoom

    H18 with split frame design with 320 l container for thermoplastics and... more

  • H18 with split frame design with 320 l container for thermoplastics and MultiDotLine<sup>®</sup> Extruder 30 cm, container for sprayable thermoplastics as well as container for 2-component sprayable cold plastics (460 l) Airless 98:2 incl. 24 l pump and g
    Zoom

    H18 with split frame design with 320 l container for thermoplastics and... more

  • H18 for thermoplastics, with MultiDotLine® universal extruder, system Kamflex, 300 l container
    Zoom

    H18 for thermoplastics, with MultiDotLine® universal extruder, system Kamflex,... more

  • H18 for thermoplastics, with 2 extruders and screed box, 300 lts
    Zoom

    H18 for thermoplastics, with 2 extruders and screed box, 300 lts

  • H18 with 320 l pressurised container
    Zoom

    H18 with 320 l pressurised container

  • H18 for sprayable thermoplastics, 300 l pressurised container, for application of up to 60 cm line width on runways, with 2 spray plastic guns, Rome/Italy
    Zoom

    H18 for sprayable thermoplastics, 300 l pressurised container, for application... more

  • H18-1 - cold paints - Airless (pump) - Airport - 4 spray gun - 100 cm – Rome, Italy [A30]

    H18-1 - cold paints - Airless (pump) - Airport - 4 spray gun - 100 cm – Rome,... more

  • H18-1 – Cold Paints – Airless (pump) – Airport – 5 paint guns – 120 cm [A28]

    H18-1 – Cold Paints – Airless (pump) – Airport – 5 paint guns – 120 cm, in... more

  • H18-1 Airless – Cold Paints – Airless (pump) – night-time road marking - Ukraine [A26]

    H18-1 Airless – Cold Paints – Airless (pump) – night-time road marking - Ukraine

  • H18-1 cold paints – Airless (pump) – white/yellow – option: 2-component external mixing 98:2 [A21]

    H18-1 cold paints – Airless (pump) – white/yellow – option: 2-component external... more

  • H18-1 – cold paints – Airless (pump) – black-yellow markings [A22]

    H18-1 – cold paints – Airless (pump) – black-yellow markings

  • H18-1 - split frame - 2-component cold plastics - pressurised container - defined agglomerates (Spotflex®) and cold paints - Airspray (low pressure) - roller disks - Serbia [B49]

    H18-1 - split frame - 2-component cold plastics - pressurised container -... more

  • H18-2 - 2-component cold plastics - bellow pump - defined agglomerates (Spotflex®) M98:2 - electrical glass bead dispenser - Germany [B53]

    H18-2 - 2-component cold plastics - bellow pump - defined agglomerates... more

  • H18-1 equipped for the application of 2-component cold plastics - bellow pump - stochastic agglomerates - M98:2 - glass bead gun - Slovenia [B50]

    H18-1 equipped for the application of 2-component cold plastics - bellow pump -... more

  • H18-1 – 2-component cold plastics – bellow pump – defined agglomerate marking (Spotflex®) - M98:2 – glass bead gun [B40]

    H18-1 – 2-component cold plastics – bellow pump – defined agglomerate marking... more

  • H18-1 – 2-component sprayable cold plastics – Airless (pump) – M98:2 – glass bead dispenser – Germany by HOFMANN Roadmarking Systems [B36]

    H18-1 – 2-component sprayable cold plastics – Airless (pump) – M98:2 – glass... more

  • H18-1 – 2-component sprayable cold plastics – Airless (pump) – M98:2 – glass bead gun – Nigeria by HOFMANN Roadmarking Systems [B38]

    H18-1 – 2-component sprayable cold plastics – Airless (pump) – M98:2 – glass... more

  • MultiDotLine® - Retro-reflection at night and wetness [C10]

    MultiDotLine® - Retro-reflection at night and wetness

  • H18-1  - thermoplastics - extruder - defined agglomerates (MultiDotLine®) and Kamflex - glass bead gun [C28]

    H18-1  - thermoplastics - extruder - defined agglomerates (MultiDotLine®) and... more

  • H18-1 - thermoplastics - extruder - defined agglomerates (MultiDotLine®) - yellow - glass bead gun [C27]

    H18-1 - thermoplastics - extruder - defined agglomerates (MultiDotLine®) -... more

  • H18-1 – thermoplastics – standard S+S extruder – plain an profiled lines [C20]

    H18-1 – thermoplastics – standard S+S extruder – plain an profiled lines

  • H18-1 – Thermoplastics – extruder – defined agglomerates on basic line (MultiDotLine®) – Czech Republic [C15]

    H18-1 – Thermoplastics – extruder – defined agglomerates on basic line... more

  • H18-1 – Thermoplastaics - MultiDotLine® Extruder – plain lines – glass bead gun [C18]

    H18-1 – Thermoplastaics - MultiDotLine® Extruder – plain lines – glass bead gun

  • H18-1 - sprayable thermoplastics - pressurised container (320 l) - Diesel heating - glass bead gun - Costa Rica [D21]

    H18-1 - sprayable thermoplastics - pressurised container (320 l) - Diesel... more

  • Pre-Marking device – roller disk
    Zoom

    Pre-Marking device – roller disk

  • Simply palletizable (exchangeable) system incl. electric, hydraulic and pneumatic quick opening devices (fittings for thermoplastic systems)
    Zoom

    Simply palletizable (exchangeable) system incl. electric, hydraulic and... more

  • Simply palletisable (exchangeable) system incl. electric and hydraulic quick opening devices as well as brackets for quick exchange of application units via forklift
    Zoom

    Simply palletisable (exchangeable) system incl. electric and hydraulic quick... more

  • Simply palletisable (exchangeable) system incl. electric and hydraulic quick opening devices as well as brackets for quick exchange of application units via forklift
    Zoom

    Simply palletisable (exchangeable) system incl. electric and hydraulic quick... more

  • Outlet tube heated by heat transfer oil and discharge valve controlled pneumatically for thermoplastics using screed box method
    Zoom

    Outlet tube heated by heat transfer oil and discharge valve controlled... more

  • Protective cover for extruder systems for MultiDotLine<sup>®</sup> extruder
    Zoom

    Protective cover for extruder systems for MultiDotLine® extruder

  • Protective cover for extruder systems for MultiDotLine<sup>®</sup> extruder
    Zoom

    Protective cover for extruder systems for MultiDotLine® extruder

  • Protective cover for electronic spacing device, e.g. MALCON4
    Zoom

    Protective cover for electronic spacing device, e.g. MALCON4

  • Protective cover for the HOFMANN universal pump system
    Zoom

    Protective cover for the HOFMANN universal pump system

  • H18 Marking machine equipped with dryer unit (blower output approx. 2x10.000 l/min at 600° C) incl. MultiDotLine<sup>®</sup> extruder 30 cm
    Zoom

    H18 Marking machine equipped with dryer unit (blower output approx. 2x10.000... more

  • H18 Marking machine equipped with dryer unit (blower output approx. 2x10.000 l/min at 600° C) incl. MultiDotLine<sup>®</sup> extruder 30 cm
    Zoom

    H18 Marking machine equipped with dryer unit (blower output approx. 2x10.000... more

  • H18 Marking machine equipped with dryer unit (blower output approx. 2x10.000 l/min at 600° C) incl. MultiDotLine<sup>®</sup> extruder 30 cm
    Zoom

    H18 Marking machine equipped with dryer unit (blower output approx. 2x10.000... more

  • Rear view camera for all self-propelled machines
    Zoom

    Rear view camera for all self-propelled machines

  • H18-1 with enlarged pressurised glass bead container 220&nbsp;l
    Zoom

    H18 with enlarged pressurised glass bead container 220 l

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

  • Premarking device - electrical with max. extension in width of 5 m
    Zoom

    Premarking device - electrical with max. extension in width of 5 m

Available application techniques
  • Cold paints
  • 2 component cold-plastics
  • Sprayable 2 component cold-plastics
  • Thermoplastics
  • Sprayable Thermoplastics

Remarks

All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.

The line widths and gaps for double lines depend on the equipment.

Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.

 

Special solutions on request.

  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l
  • Einzellinie Einzellinie s-l Schriftzug
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi
  • Einzellinie Einzellinie s-l Doppellinie Doppellinie s-l Doppellinie Kombi 3 Liniensystem 3 Liniensystem Kombi

How can we help you today?

Messagebox Kontaktformular

Messagebox Kontaktformular