H9-1 Serie
Hand-guided, self-propelled marking machine for small varied marking jobs
Figure: Example machine from H9-1 product line
Available Application techniques
Description
Infinitely hydraulic drive. Uniform drive of front wheels by differential drive
Vibration isolation for motor/compressor unit
Fixing for marker unit right andleft side
Electronic spacing device available as an option
Flashlights as an option
Straight-run fixing device for rear wheel in order to maintain easily the direction
Uniform line widths, even intight bends
Drive unit according to CE (declaration of conformity)
Trailer with driver seat available as an option
H9-1 Airspray:
Can be equipped with additional hand spray gun.
Material container with manual agitator.
H9-1 Airspray 2c 98:2:
Hardener quantity infinitely variable between 1,0 and 4,0 percentage by weight.
2c spray gun can be used also as 2c hand spray gun.
Possibility to use commercial paint buckets as an insert container.
H9-1 Airless:
Paint spray gun can also be used as hand spray gun.
Possibility to use commercial paint buckets as an
insert container. Pump delivery rate: up to 7,5 l/min
H9-1 Airless 2c 98:2:
Hardener quantity infinitely variable between 1,2 and 3,0 percentage by weight.
Equipment for internal mixing (static mixer).
2c spray gun can be used also as 2c hand spray gun.
Possibility to use commercial paint buckets as an insert container.
Pump delivery rate: Up to 6,0 l/ min. for mixing ratio 98:2.
H9-1 Airless 2c 1:1:
Equipment for internal mixing (static mixer) or external mixing (mixing inside of atomising blower).
2c spray gun can be used also as hand spray gun.
Possibility to use commercialpaint buckets as an insert container.
Pump delivery rate: Up to 2 x 3,5 l/ min.
H9-1 Sprayable Thermoplastic:
Container and gun indirectly heated by heat transfer oil which is heated by LPG.
Equipment for single lines or continuous double lines.
Infinitely variable adjustment of the outlet of the gun towards road surface.
Marker unit with ground wheel with equipment for double lines.
Pneumatic agitator (optional).
Line widths (dependent on equipment):
H9-1 Airspray:
10 until 60 cm
H9-1 Airspray 2c 98:2 / H9-1 Airless / H9-1 Airless 2c 98:2 / H9-1 Airless 2c 1:1 / H9-1 Sprayable Thermoplastic:
10 until 30 cm
Specifications
1-cylinder 390 cm³, Honda gasoline motor,
air-cooled
8,4 kW at 3 200 rpm
Drive unit:
Hydrostatic infinitely variable
Air output:
H9-1 Airspray / H9-1 Airspray 2c 98:2 / H9-1 Sprayable Thermoplastic:
Up to 670 l/min (2-cylinder compressor)
H9-1 Airless / H9-1 Airless 2c 98:2 / H9-1 Airless 2c 1:1:
Up to 260 l/min (2-cylinder compressor)
Pressurised glass bead container
(max. 1,0 bar):
20 l (one container)
2 x 20 l (two container)
Dimensions (L x W x H mm, dependent on equipment):
| H9-1 Airless | 1 600 x 1 100 x 1 220 |
| H9-1 Airspray | 1 650 x 1 050 x 1 220 |
| H91- Airspray 2c 98:2 | 1 650 x 1 050 x 1 220 |
| H9-1 Airless 2c 98:2 | 1 600 x 1 100 x 1 230 |
| H9-1 Airless 2c 1:1 | 1 600 x 1 100 x 1 230 |
| H9-1 Sprayable Thermoplastic | 2 000 x 1 150 x 1 220 |
Weights:
| H9-1 Airless | approx. 250 - 280 kg / 551 - 617 lbs |
| H9-1 Airspray | approx. 255 - 285 kg / 562 - 628 lbs |
| H9-1 Airspray 2c 98:2 | approx. 255 - 285 kg / 562 - 628 lbs |
| H9-1 Airless 2c 98:2 | approx. 370 - 400 kg / 815 - 881 lbs |
| H9-1 Airless 2c 1:1 | approx. 290 - 320 kg / 640 - 705 lbs |
| H9-1 Sprayable Thermoplastic | approx. 370 - 400 kg / 815 - 881 lbs |
Techniques / Container volumes: (dependent on equipment)
| Cold paints | up to 48 l (one container) or 2 x 24 l (two container for one or two colours) |
| Sprayable 2-component cold plastics | without material container |
| Sprayable Thermoplastics | up to 50 l |
Trailer with driver seat
Adjustable sitting position
Pneumatic tires
Dimensions (L x W x H mm):
900 x 740 x 1 000
Weight:
23 kg / 50 lbs
… the perfect and comfortable supplement for H9 series (dependent on equipment)
Photos
Videos
Brochures
Equipments
Preheaters
Marking Patterns
Available Application techniques
Remarks
All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.
The line widths and gaps for double lines depend on the equipment.
Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.
Special solutions on request.
