Contact

H26-4

A compact machine with high capacities

Figure: example machine out of H26-4 product line

Available Application techniques

Cold paints 2 component cold-plastics Sprayable 2 component cold-plastics Thermoplastics Sprayable Thermoplastics

Description

Robust, high-effective 7-ton construction machine axle with hydraulically switchable speed ranges combined with a high-speed hydraulic motor

Cooling system with automatic adaption of ventilator speed to ambient temperature and machine load (noise reduction at normal machine load and higher cooling performance at extreme machine load)

Inlet of whole cooling air from upper side of the machine - far away from spray mist

Two pressurised glass bead containers. Filling openings for glass beads at the side of the machine in ideal filling height

Cockpit incl. all necessary operational controls laterally adjustable without the need to install guides

Arrangement of operating and supervising instruments can be easily modified according to individual requirements. Adjustable, easy extractable spray gun support for centre and edge line markings

Motor compartment easily accessible for service work.High ground clearance also eases service works from below

Excellent panoramic view, also when driving backwards

Available as an option:
Individual application units are exchangeable (exchangeable container) with low effort by quick opening device systems and modular design principle

Line widths:
10 up to 100 cm (dependent on equipment)


Specifications

4-cylinder 3 800 cm³,
Kubota Turbo diesel engine,
water-cooled 

Version I: **
Non-Label (comparable to EU Stage II resp. (US) EPA Tier 2)

74,0 kW at 2 600 rpm

Version II: **
Low-emission EU Stage V resp. (US) EPA Tier 4 
with diesel oxidation catalyst (DOC) and Diesel Particulate Filter (DPF)

55,4 kW at 2200 rpm

** further exhaus stages upon request

Air output:

2 400 l/min at 7,5 bar;
Compressed air cooler

Pressurised glass bead containers:
2 x 160 l (max. 3 bar)

Dimensions (L x W x H mm):
5 300 - 6 100 x 1 340 x 2 380 (dependent on equipment)

Weight, equipped:
approx. 2 400 up to 4 200 kg
approx. 5 290 up to 9 260 lbs 

Container volumes:

Cold paints up to 920 l
2-component cold-plastics up to 600 l
Sprayable 2-component spray-plastics up to 800 l
Thermoplastics up to 500 l
Sprayable Thermoplastics up to 600 l

Photos

H26 Road marking machine with pressurised container (650 l) for…
H26 with pressure container (2x385 l)
Cold paints
H26 in Portugal (Air Base) equipped with 1-component cold paint…
H26 in Madrid/Spain with pressurised container system for cold paints,…
H26 with pressure containers (2 x 225 l) mounted longitudinally on…
H26 in Bucharest/Romania with pressurised container system for cold…
H26 road marking machine for sprayable 2-component cold plastics using…
H26 in Saint Petersburg/Russia equipped with 1-component cold paints…
H26 at Airbus in Hamburg / Germany equipped for Airless 1-component…
H26 in Ramstein - United States Air Base, Germany with Airless system…
H26 Road marking machine for sprayable 2-component cold plastics using…
H26 bellow pump system with 540 l pressurised container equipped with…
H26 in extruder method, mixing ratio 98:2, with pressureless container…
H26 with pressureless container (570 l) for thermoplastics with…
H26 with pressureless container (570 l) for thermoplastics with…
H26 Combi-System for thermoplastics MultiDotLine®Plus as well as for…
H26 with pressure container (300 l)
Sprayable Thermoplastics
H26 with pressurised container (300 l) and gas burner unit, 3 guns for…
H26/H33 with pressurised container (300 l), detachable container wall…
On-board computer and line-gap electronic MALCON4

Videos

[A23] H26-3 Cold Paints – Airspray (low pressure method) – Colombia
Cold paints
[A06] H26-3 - cold paint - Airless (pump) - Airbus - 90 cm,…
[B46] H26-4 - 2-component cold plastics - bellow pump - plain lines…
[B45] H26-3 - 2-component cold plastics - screed box - profiles -…
[B51] H26-3 - 2-component cold plastics - bellow pump - 45° diagonally…
[B30] H26-3 – 2-component cold plastics – bellow pump – screed box for…
[B44] H26-4 - 2-component cold plastics - bellow pump - stochastic…
[B61] H26-3 - 2c sprayable cold plastics - Airless (pump) - M98:2 -…
[C35] H26-4 equipped for the application of thermoplastics, with…
[C10] MultiDotLine® - Retro-reflection at night and wetness
Thermoplastics
[C17] H26-3 Thermoplastics - extruder – defined agglomerates on a…
[E23] Material transfer system – thermoplastics, thick layer as well…

Brochures


Equipments


Accessories


Preheaters


Specialties


Marking Patterns

Available Application techniques

Cold paints
Cold Paints
2 component cold-plastics
2 component cold-plastics Smooth line
2 component cold-plastics
2 component cold-plastics Spotflex
2 component cold-plastics
2 component cold-plastics stochastic
2 component cold-plastics
2 component cold-plastics 90° cross profile
2 component cold-plastics
2 component cold-plastics 45° cross profile
Sprayable 2 component cold-plastics
Sprayable 2 component cold-plastics
Thermoplastics
Thermoplastics Smooth coat
Thermoplastics
Thermoplastics MultiDotLine®
Thermoplastics
Thermoplastics MultiDotLine® Plus
Thermoplastics
Thermoplatics Kamflex
Thermoplastics
Thermoplastics Chessboard
Thermoplastics
Thermoplastics Longflex
Thermoplastics
Thermoplastics Rip-N-Dot
Thermoplastics
Pinturas termoplásticas LongDot®
Sprayable Thermoplastics
Sprayable Thermoplastics

Remarks

All information is given without the use of glass bead guns, since in this case the required air flow rate has to be calculated.

The line widths and gaps for double lines depend on the equipment.

Combined double lines, especially for hand-guided machines, are often dependent on the equipment and require, among other things, the addition of higher-grade line-gap electronics.

 

Special solutions on request.

  • Cold paints Single line Single line s-l Double line Double line s-l Double line combi 3 line system 3 line system combi
  • 2 component cold-plastics Single line Single line s-l Single line Single line s-l Double line combination
  • 2 component cold-plastics Single line Single line s-l Double line Double line s-l Double line combination
  • 2 component cold-plastics Single line Single line s-l Double line Double line s-l Double line combi
  • 2 component cold-plastics Single line Single line s-l
  • 2 component cold-plastics Single line Single line s-l
  • Sprayable 2 component cold-plastics Single line Single line s-l Double line Double line s-l Double line combination
  • Thermoplastics Single line Single line s-l Double line Double line s-l Double line combi 3 line system 3 line system combi
  • Thermoplastics Single line Single line s-l Double line Double line s-l Double line combi
  • Thermoplastics Single line Single line s-l
  • Thermoplastics Single line Single line s-l
  • Thermoplastics Single line Single line s-l Lettering
  • Thermoplastics Single line Single line s-l Double line Double line s-l Double line combi
  • Thermoplastics single line single line interrcupted
  • Thermoplastics single line interrupted double line double line interrupted combi line
  • Sprayable Thermoplastics Single line Single line s-l Double line Double line s-l Double line combi 3 Line system 3 Line system combi

Contact

Please inform us about your individual requirements

* Mandatory fields